搜索

SBRO
半序批式逆滲透

SBRO 高回收率水回收再利用技術

戈潤的半序批式逆滲透(SBRO)是一種高回收率逆滲透製程,可協助工業設施提高水回收率、降低能源消耗並減少濃鹽水量,即使進流水質有所變動,仍能維持穩定可靠的運轉效能。


SBRO 採用標準逆滲透組件,透過優化製程設計提升運轉效率。不同於傳統逆滲透系統持續以高壓運轉並連續排放濃鹽水,SBRO 採用可控的半序批式運轉模式,在產水階段高效率回收水資源,並於運轉週期之間間歇性沖洗排出濃鹽水,減少結垢、薄膜污染及廢液排放。


每套 SBRO 系統均搭載 SmartOps AI 智慧營運平台,可依據運轉條件變化進行自適應控制、自動化優化及遠端監控。


對於面臨水資源短缺、排放限制、廢水水質波動或用水成本上升等挑戰的工業設施,SBRO 提供更高效、更智慧的高回收率水回收再利用解決方案。

Benefits of SBRO

最大化水回收率

SBRO achieves high recovery in a single-stage process, creating more usable water from industrial wastewater, brackish water, and challenging feed streams. Higher recovery means less brine, lower feedwater demand, and reduced discharge volumes.

降低能源消耗

Conventional RO runs at a fixed high pressure sized for worst-case osmotic conditions. SBRO ramps pressure dynamically through each semi-batch cycle to follow the feed’s osmotic profile, avoiding wasted energy. Field installations worldwide show roughly 30% lower specific energy consumption than conventional RO under comparable conditions.

Improve Fouling and Scaling Resistance

Scaling and fouling are the biggest barriers to high-recovery RO. Conventional systems keep membranes in constant contact with concentrated brine, driving mineral precipitation and foulant buildup. SBRO’s short cycles and intermittent flushing remove concentrated brine before scale can form and disrupt foulant accumulation on the membrane. Gradiant’s zero-recovery flushing adds another layer of protection, extending membrane life, reducing cleanings, and improving uptime.

Adapt to Variable Feedwater

Industrial water is rarely consistent. Quality, flow, temperature, and contaminant loads shift over time, and conventional RO struggles with anything but steady state. SBRO uses adaptive controls to respond in real time, making it well suited to industrial wastewater reuse, process water recovery, and brackish water treatment.

Gradiant’s Semi-Batch RO (SBRO)

SBRO runs in semi-batch cycles. During production, feedwater enters and permeate is recovered at 100% recovery, with pressure ramping up as the feed concentrates. A flushing cycle then purges concentrated brine, cutting brine volume and preventing scale and fouling. Zero recovery flushing can be used to counter fouling or off-spec permeate, maximizing membrane performance in poor feedwater.

Designed for Industrial
Water Challenges

SBRO is built to recover more water from difficult streams while cutting cost, risk, and environmental impact.

工業廢水
Reuse

Recover water for process, utility, or other non-potable use.

Semiconductor Water
Reclamation

Handle variable, complex fab wastewater to support reuse, capacity growth, and site resilience

Brackish Water
Treatment

Improve recovery while reducing brine and energy use

製程用水
回收

Deliver high-quality water for operations with shifting feed quality

Minimum &
零液體排放

Pair SBRO with CFRO to boost recovery and lighten the load on downstream MLD/ZLD systems

美國某領先半導體製造商 LSR 專案的 SBRO 系統安裝現場

SBRO installation for a high fouling and scaling application for an industrial manufacturing site in Malaysia

想進一步了解嗎?

请填写表格下载白皮书

请填写表格下载白皮书

请填写表格下载白皮书